A proper car wash is essential as it can make your car’s exterior look clean and dirt-free. Depending on the car’s condition, experts recommend a car wash once every week or two.
One of the best ways to accomplish a car wash is pressure washing your vehicle. Check out the Hyundai power product discount code to enjoy huge savings on power equipment products.
In this article, let’s see how to use a pressure washer to wash your car faster along with some tips and tricks.
1. Use the right pressure washer
Choosing a pressure washer that does not damage the car’s paint or delicate surfaces is crucial. Therefore, the water flow rate, nozzle attachment and versatility, pressure output and power are some factors to be considered when choosing the pressure washer. Most importantly, a pressure washer with a PSI (pounds per square inch) of around 1200 to 1900 is usually suitable for washing cars without causing damage.
2. Choosing the correct nozzle
Normally, a nozzle that is less than a 25-degree spray pattern to pressure wash the car is not recommended. It is always advised to use a nozzle that is 40 degrees as it can reduce any damage causing the car. A 40-degree nozzle can be used for rinsing and light cleaning windows, roofs, etc.
3. Avoid high pressure on delicate areas
Once you start washing, be cautious around delicate areas such as door handles, side mirrors, and emblems. Lower the water pressure to avoid damage on paint and the surface. The pressure can be reduced by changing the angle of the water spray machine.
4. Pre-soak the vehicle
Before using a pressure washer, pre-soak the vehicle to remove stubborn soils like bugs, tar, oil and grease deposits on vehicles. This will make the cleaning process more effective and prevent scratching the paint. The more pre-soaked it is, the less scrub is required.
5. Use a gentle soap
Avoid any kind of soap that damages the vehicle’s paint. A mild automotive soap designed specifically for washing cars would be perfect. Foam it up and cover the entire car with a layer of foam. Gently scrub with a sponge till you make sure you get all the dirt into the sponge.
6. Mind the grilles and vents
Pay attention to grilles and vents when pressure washing. Avoid opening areas to avoid entering water to sensitive parts of the vehicle that can cause any damage. Close the windows and doors to make sure that water does not enter the inside of the vehicle.
7. Rinse thoroughly
This is the most important step. Once you have scrubbed the entire exterior of the vehicle, rinse off the foam with the 40-degree tip on your pressure washer. Do not leave any soap or foam on the exterior of the vehicle, Give a complete rinse off for 15 to 30 minutes washing top to bottom of the vehicle.
8. Dry properly
As the last step, dry the car with a thick, high-quality, microfiber towel. This step helps prevent water spots and streaks from forming on the paint. The more spot-free it looks, the more meticulous and professional the car washing job appears.
Pressure washing your vehicle requires careful consideration to avoid damage. Select appropriate pressure and nozzles, maintain a safe distance from the surface, use a gentle soap, work methodically from top to bottom, and thoroughly rinse to achieve a clean finish, which are the steps of using a pressure washer. Remember to protect delicate areas, dry effectively, and consider specialized attachments for enhanced results.
Do not forget to maintain the pressure washer regularly for any signs of wear or damage, and perform maintenance as needed to ensure it continues to work effectively and safely.
